Hallo,
wer hat schon ein neues AC 1? Wie sind Gewicht und Camberrotation im Vergleich zu 2010? Was ist sonst neu? Pics?
Nordwest
Hallo,
wer hat schon ein neues AC 1? Wie sind Gewicht und Camberrotation im Vergleich zu 2010? Was ist sonst neu? Pics?
Nordwest
Mehr braucht man zu der Rotation nicht sagen...
http://www.youtube.com/watch?v=Nt0tLdCVWEc
...wer hat sich denn eins geholt? Nähe Osnabrück, vielleicht ![]()
Habs mir am Wochenende am Lago genauer beim Francesco Pratti ITA-10 angesehen, sieht toll aus, hat einen extremen Bauch gegenüber den Vorgängern. Schnell ist es, sorry wenn ich hier subjektiv urteile, gegenüber dem Vapor 2011 erscheint es als wäre es einen Quadratmeter kleiner, oder schwindeln die bei Gaastra so.
Im direkten Vergleich Vapor vs. AC1 war es pari, soweit ich das von der Ferne beurteilen konnte... leider hatte ich einen tatsächlichen qm weniger war mit 7,7 unterwegs, die jungs mit 8,7!
Camperrotation, ich habe keinen mit einem Fuß 1 Meter über dem Brett gesehen, wie früher öfters... einmal fest anziehen und alle klappen um..
Hallo Tobson,
komme aus Osnabrück. Ich bekomme in ca. 3 Wochen die AC-1 2011 in den größen 7.2/7.9/8.6/11.0
wir sehen uns dann am Dümmer.
Nach GER-663 suchen.
Gruss
Thorsten
Moin Thorsten,
willst du mir diese direkt für den halben Preis verkaufen? ![]()
Ich bin gespannt was du mir von dem neuen Schnitt und der Rotation berichten kannst.
Ich habe dich schon am Dümmer gesehen, du bist doch jetzt Teamfahrer? Richtig?
MfG
Toll, bekomme mein Segel nämlich auch Ende April/ Anfang Mai. Extremer Bauch heisst auch gutes Angleiten....
Warum kommen die so spät?
Warum kommen die so spät?
Letztes Jahr waren sie immerhin Anfang April da. Aber da hatten sie ewig keine Homepage. Heuer wohl umgekehrt. Hoffentlich bekommen dann alle eins, die eins wollten, letztes Jahr im mai waren einige Größen schon ausverkauft. Was machen denn die Racer, die letzten Herbst alles verkauft haben? Aber egal, ich fahre heuer eh weiter die 2010er, die letzten Munzlinger´s.
Nordwest
Aber egal, ich fahre heuer eh weiter die 2010er, die letzten Munzlinger´s.
Munzlinger hat vorher die Point-7 geschnitten?
Wusste ich garnicht... scheint ja ein Workaholig zu sein, wenn er auch noch genügend Schnitte für Vandal und Gaastra liefern musste... ![]()
Wusste ich garnicht... scheint ja ein Workaholig zu sein, wenn er auch noch genügend Schnitte für Vandal und Gaastra liefern musste...
Er war bis Ende 2010 nur für P7 zuständig, seit 2011 dann nur für Gaastra. Bisher hat er nur das AC-1 abgeliefert. Und wieviel Munzlinger das hat, darüber kann man streiten... ![]()
Ups.. war schon spät gestern... ![]()
Hab natürlich Kaseler und Munzlinger durcheinander gebracht ![]()
Hallo...ich habe heute versucht mein 2011 ac-1 mit passendem p7 mast aufzuriggen. Alles nach anleitung eingestellt. Aber die camber rotieren nicht. Bin fast verzweifelt. Beim abriggen habe ich am madt sogar abschuerfungen von der orangen schicht gesehen. Kann mir jemand helfen? Segel steht schoen aber cam 2 und 3 voll blockiert...alles versucht....
Hallo,
wenn vorhanden, entnehme doch bitte erstmal die Spacer, bis das Segel einige Male auf dem Wasser war...
Grüße
Totti
Hier gibt es einen Lösungsvorschlag, Beitrag vom 26.08.2011: http://www.point-7.com/?p=1379&lang=en#comment-9935
Alles anzeigenDear Andrea
I find you answer to Dexx very arrogant and patronizing.
So far I have kept my mouth shot and not complained about the many problems with this years AC-1 sails. However, you answer to Dexx did it for me and I now have to react to your company policy and products that clearly are disrespectful to your clients.
Firstly I kindly ask you to respect your customers. Hence if your sails are exclusively developed for “good” sailors – in this case it’s apparently synonym for top pro PWA sailors, then please warn your customers about this when your marketing you AC-1 sails.
2 month ago I received my 2011 AC-1, 11m2, 9,3m2 & 7,9m2 along with +C100 570, 550, 490 & 460 masts. Since then I have had nothing but trouble with the sails. The new +C100 570 mast is a disaster and a chapter of it’s own, but let’s not get into that now.
Problem #01
The “tip” on batten 1 & 2 (counting from below of the sail) have to be sanded in all sails, because they are too thick. I was not informed about this, but had to figure it out by my self. I broke 3 battens before I realized what was wrong. I then had to figure out – again all by my self – how much of the material I had to sand off and where (how afr in on the batten tip).Problem #02
The bottom camber remind me of the GUN SAILS cambers from the nineties.
The camber – in combination with the orange plastic-foil layer on the mast – is a nightmare. The sharper edges on the cambers “balls”, cut into the plastic layer and make rotation even more difficult.Problem #03
The rest of the cambers are for some strange reason all to small – the diameter is to narrow. What Dexx is referring is that he also tried to fix the problems with the 2011 AC-1 sails, on his own. He has clearly also figured out that the cambers are to narrow and that’s it’s only the tip-edges of the camber that rest on the mast. IMHO the cambers would fit an RDM mast.
There’s gap of about 2-3 mm from the rollers to the mast – hence that rollers have absolutely no effect. Because of this Dexx has cut away parts of the cambers edges to try to get close to the rotation you demonstrated on video earlier this year. On the video you showed us how a proto AC-1 rotated extremely well when by just applying pressure from the tip of your index finger???The problem with too narrow cambers applies for all my sails as well as the sails belonging to national top sailors (not PWA though), I have seen. What’s even more bizarre is that the cambers are all the same size (too small). In all other sails other sail brands) I have owned so far, the cambers have different sizes according to their position on the mast.
Why the sails are produced and delivered with cambers that don’t fit and have the same size is a mystery to me???
Solution to problem #01
To prevent further battens from breaking I have changed de-rigging procedure. According to Point-7 you can removed the boom from the rig and then let the downhaul go – don’t. Keep the boom on and release downhaul tension gently (10-15 cm). Then release outhaul tension slightly. Then release the cambers from the mast – one by one. The cambers are accessed through the sails zippers and boom-cut. It’s a bit of a hazel but nothing compared to have to produce and implement a new battenWhen I rig the sails I choose to use the same procedure – reverse. Better safe then sorry
Solution to problem #02 & 03
To others reading this, owning 2011 AC-1 sails and not being PWA pro riders I have the following suggestions on how the problem might be solved.
I have found that MauiSails cambers (from TR-7 sails) and Gaastra cambers (before Vapor) can successfully replace Point-7’s cambers. Both MauiSails and Gaastra deliver cambers in different sizes – this way it’s possible to find some that match – and match according to their position on the mast.
I have replaced the bottom camber – the one that reminds me of GUN’s camber for the nineties – with the bottom Neil Pryde camber for RS Racing sails (RS7 & RS8 or RS slalom from 2007/2008). The camber has to be sanded on the part that rest against the sail, but it’s possible to make it fit and the rotation is greatly improved.
I might add that I have found battens and batten tip’s from Neil Pryde RS Racing sails (RS7 & RS8) to be great replacements for the broken Point-7 battens (Especially considering that I have waited 1,5 month for a Point-7 replacement batten I ordered).@Dexx
I understand you frustration with 2011 AC-1 and I share you disappointment with the QA and Point-7’s client policy. I’m glad you reacted to the poor performance (and to some extend the quality) of the sails and tried to get an reaction from Point-7. The windsurfing community needs to know about such issues and the companies have to listen to our feedback and respect their clients.Andrea
I understand that you expect to participate in FW world championship in Denmark next week? I might suggest that before you leave, you fill your quiver with battens and cambers (cambers that fit), for us (Denmark) to get the performance out of our AC-a sails that we where promised, the one we deserve, the performance we paid for and patiently waited for.Cheers
Paul Fisker (DEN 75)
autsch. das klingt ja mal garnicht gut!! dabei haben sie das 2K11 so angepriesen...
na dann bin ich mal auf ne reaktion gespannt!
ich bin noch keines gefahren, aber hab selber bis dato nur gutes von den segeln gehört.
autsch. das klingt ja mal garnicht gut!! dabei haben sie das 2K11 so angepriesen...
na dann bin ich mal auf ne reaktion gespannt!
Was soll man schon groß rum diskutieren. Ist halt immer gefährlich wenn man als Hersteller ein Forum oder Blog zur Verfügung stellt, dann kommt halt auch mal negative Kritik. Man wird es sicher aussitzen, machen andere auch...
Erinnert mich an diverse Fälle von gebrochenen Cambern usw., wo die Schuld auch beim Kunden gesucht wurde und die Kunden sitzen gelassen wurden.
Was willst Du denn gutes gehört haben ausser von Fahrern, die die Teile umsonst oder teilgesponsert bekommen oder dort arbeiten? Was werden die wohl sagen?
Ich kann aber auch den Standpunkt von Andrea Cucchi verstehen und das Gejammer verwundert mich meist ein wenig. Wir reden von Racesegeln, das sind kompromisslose Rennmaschinen und keine Freeridesegel. Das ist ja bald mein Lieblingsspruch hier im Forum: So manch einer ist mit entschärfteren Material deutlich besser beraten und bedient. Will man natürlich nicht hören. Solche Segel werden halt anders aufgeriggt, anders abgeriggt (soviel zum Thema gebrochene Latten), anders gehalst. Camber springen durch den kraftvollen Zug der hinteren Hand um, sprich vom Schothorn zum Vorliek und nicht anders.
Er spricht ja nun auch grad dieses Video an, ich meine dort sah man deutlich, daß die Camberrotation am Schothorn eingeleitet wurde. ![]()
Ich glaube allerdings auch, daß DEN-75 nicht gerade ein Anfänger ist und glaube ihm diesen Fall, zu mal ich ja auch Leute kenne mit ähnlichen Problemen.
naja, ich kenn jetz auch NICHT teamfahrer die das 2011 fahren und keine probleme mit haben, die können aber auch alle fahren. das mit dem "entschärften" material ist echt schon dein leitspruch, stimmt aber auch!
Wenn es tatsächlich Segel gibt, die diese benannten Probleme nicht haben, wird es wohl gravierende Produktionsschwankungen geben oder eine Änderung in der Serie.
Trotzdem , so sollte man mit Kunden grundsätzlich nicht umgehen. Und der Hinweis , dass die Pros`s keine Probleme hätten ist gefährlich.
http://www.pwaworldtour.com/index.php?id=1388
Platz 11 von 11 in der Hersteller Wertung ist jetzt auch nicht das rettende Argument.
Naja , dafür schauen die Segel wenigstens grauslich aus ![]()
Hey, also ich fahre nur die AC-1...in allen Größen. Ich hab gar keine Probleme damit. Im Gegenteil...gerade das 6.3 is eines der besten Segel für ich überhaupt kenne.
Wenn es Probleme our der Rotation gibt ist es sicher irgendwas am Trimm. Bei mir funktionieren alle Segel super.
Solltet ihr weiter Probleme haben schreibt our mal, vielleicht kann ich helfen.