Anders Bringdal hat etwas getan und eine neue Slalomlinie am Start, ein paar Bilder vom 54 anbei.
Später stelle ich mal die Specs ein und was mit den anderen Boardlinien ist.
Produziert wird in Vietnam!
AB+ 2009 mit neuer Slalomlinie und mehr...
-
-
Und noch ein Pic...
-
http://www.surf-forum.com/showthread.php?t=1314
Slalom 54: 238x54 75l
Slalom 59: 240x59 95l
Slalom 67: 238x67 110l
Slalom 76: 236x76 123lSpeed 46: 226x46 63l
-
Ein Video zu den neuen Boards.
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/_ueBtFaxwh8&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/_ueBtFaxwh8&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>Gruß Florian
-
Hier ein paar Bilder von Anders Bringdal mit seinen 2009 Boards.
-
-
Moin,
sehn gut aus, allerdings wie echte Pummelchen
Gibt es da eigentlich einen Deutschlandvertrieb? -
Jein, die Boards können über dieses Forum bezogen werden, sobald sie fertig sind...
-
what is the price?
-
what is the price?
Depends from the size, 1.649 - 1.749 Euro, MRP.
They are avaiable soon, every day boards are coming out of the factory...
-
Nur so für meine Allgemeinbildung: Im Video weiter oben mit AB erwähnt er eine Produktionsstätte in Vietnam - habe ich das richtig verstanden? Produziert da sonst noch jemand? Ich kannte nur Cobra (Thailand) und dann noch die Produktionsstätte in Tunesien (AHD?).
-
-
Nur so für meine Allgemeinbildung: Im Video weiter oben mit AB erwähnt er eine Produktionsstätte in Vietnam - habe ich das richtig verstanden? Produziert da sonst noch jemand? Ich kannte nur Cobra (Thailand) und dann noch die Produktionsstätte in Tunesien (AHD?).
Produziert Drops nich in China oder so???
-
Nur so für meine Allgemeinbildung: Im Video weiter oben mit AB erwähnt er eine Produktionsstätte in Vietnam - habe ich das richtig verstanden? Produziert da sonst noch jemand? Ich kannte nur Cobra (Thailand) und dann noch die Produktionsstätte in Tunesien (AHD?).
AB+ produziert in Vietnam, richtig. Es gibt auch noch Boardproduktionen in China, auf Gran Canaria, Fuerte...
-
AB+ produziert in Vietnam, richtig. Es gibt auch noch Boardproduktionen in China, auf Gran Canaria, Fuerte...
... München...
Anbei noch ein paar Bilder von Anders Slalomboards.
Gruß Florian
-
Also optisch gefallen sie mir schon, sehen sehr harmonisch von der Outline her aus. Bin gespannt
-
Hier nochmal der Slalom 54 und der Speed 46:
-
-
Wer ist der Shaper? Habe irgendwo gelesen, dass Marco Copello jetzt wohl mit Anders zusammenarbeitet. Was ist da dran?
-
Totti, hast du zu den Fragen oben irgendwelche Infos?
-
Meines Wissens stammt alles von Paolo Rista, ich frage Anders aber gleich mal...
-
-
Hab da was gefunden:
Zitat von Windsurfjournal.comHaving recently set up home in the south of France, Anders Bringdal has found himself much closer to another important windsurf person living nearby, in the shape of shaper Marco Copello !
The two know each other very well and this summer Copello shaped a couple of new speed boards for Bringdal, one at 42cm wide, the other 50cm, all this to help his mate compete at the speed event in Sotavento on Fuerteventura in the Canaries?
For the time being that?s where the project stays, some prototypes for Bringdal, but there?s obviously every chance that S-10 will be back on the blower to Copello regarding some future developments? -