A website dedicated towards the Pro-Limit/C3 speed fins?
At https://surf-forum.com/www.powertrading.de you can find some more pics of the new fins.
Pro Limit Speedfinnen
-
Zitat von boogieAlles anzeigen
hi guys,
all i can say for now is that i have stopped working with Prolimit a few months ago and that the fins linked to above are not genuine Boogie/C3 approved fins and certainly not custom fins.
i was quite surprised to see the Prolimit website behind the link myself and didn't know about it before.the designs of those fins are from the very early proto fins we made together with Prolimit and have been through several development stages since then as they had obvious flaws.
NOT ONE of the proto fins i have received were ever made by a CNC machine, but cheap chinese hand shaped fins that were so far off my design specs that i would never give my approval...the samples martin is talking about in the post above are from a different manufacturer and look quite different too. we are going to release them very soon under or own label and NOT together with Prolimit.
as soon as they are available you will hear about them.
Boogie
hmm...
-
Eine, wie ich finde, sehr schwache Argumentation, mit der er versucht, nun seine G10-Fräsware an den Mann zu bringen.
Gibt es hier zufällig einen CAD-Experten, der anhand des kleinen Bildchens mit der Programmoberfläche, die CAD-Software identifizieren kann, die Boogie offenbar verwendet?
Gruß
Fred
-
Die Software-Frage ist geklärt -> Rhino
Fred
-
-
Die Software-Frage ist geklärt -> Rhino
Fred
ICh versteh den grund nciht ganz, mit der argumentation???
-
Hi Oliver,
Rhino is a cad draving program, from where you can then, when using a cam program, generate all the X Y Z corodinates used for a CNC machine to follow when milling out the fin or another product.Dennis
-
Eine, wie ich finde, sehr schwache Argumentation, mit der er versucht, nun seine G10-Fräsware an den Mann zu bringen.
Hat natürlich den Vorteil, dass man in kurzer Zeit mehr Finnen produzieren kann. Dürfte ein immenser Zeitvorteil sein gegenüber per Hand gebauten Carbonfinnen.
-
Hi Oliver,
Rhino is a cad draving program, from where you can then, when using a cam program, generate all the X Y Z corodinates used for a CNC machine to follow when milling out the fin or another product.Dennis
HI Dennis,
I hope you got my PM.
Yes i know what a CAD programm is, wo work in school with it.
But i don't know can be so bad at a fin witch is made by a CNC modulated fin, that is designt by CAD.But thank you for the explaining it:D
Oli
