Zur Info, wer mal selbst Foil bauen und diese registrieren möchte:
ZitatAlles anzeigenDear Manufacturers,
Please find attached the registration forms for the registration of the 2020 Foil equipment.
For Foils, the following details, for each model registered, must be submitted by 31st January 2020
PWA Foil Registration form completed.
· Exact 1:1 outline diagram of the front wing shape including measurements.
· Exact 1:1 outline diagram of the rear wing shape including measurements.
· Exact 1:1 cross section diagram of the front wing at 10cm from the centreline
· Exact 1:1 cross section diagram of the front wing at 30cm from the centreline
Please complete all measurements on the registration form. You may note them on the diagram, but the diagram is only to aid measurements, the final measurements must be entered on the form and only the measurements entered on the form will be used in any scrutiny of equipment.
Each form / worksheet must only include measurements for up to one complete set of foils. For additional components in different sizes and shapes, additional forms or worksheets must be completed but you do not need to repeat measurements for components used in each version (for example masts and fuselages that have already been registered on a different form).
Brands / manufacturers may only register foils comprising components designed and produced by the brand who is registering the foil(s) and may not register component parts designed and produced by other brands.
Sailors may only register foils that are made up from the component parts registered by a single brand and may not mix and match parts from different foil registrations of different brands.
No minimum quantities are required to be produced, but foils must be commercially available to buy.
Brands do not need to be members of the PWA to register foils but branding on sails and results in press and results shall only be allowed for members. Any brand wishing to enquire about membership should contact the PWA.
Kind regards
The PWA Team
